rcn02 resistors rev.c 1/2 chip attenuators ( type) rcn02 z features 1) compare with single type 2) guarantee the attenuation ( 0.3db, 0.5db) 3) mounting area 50% less 4) big reduction for mounting cost (3 times once) 5) iso9001- / iso/ts 16949-approved z quick reference the design and specifications are subject to change without prior notice. before ordering or using, please check the latest tec hnical specifications. rcn02 (0404) 1010 50 ? no. of elements no. of terminals part no. size code operating temperature range rated power (70 c) voltage standing wave ratio impedance ( c) 3 4 0.04w / package ? 55 to +125 max 1.3 z dimensions (unit: mm) 0.33 1.0 0.1 1.0 0.1 +0.1 ? 0.05 0.34 +0.05 ? 0.1 r1 r2 r2 43 12 0.35 0.1 0.25 0.1 0.2 0.1 equivalent circuit diagram marking (terminal no.4)
rcn02 resistors rev.c 2/2 z part no. explanation packaging specifications code c r n0 m1 3 5003 a m1 part no. code specification code attenuation a3 5001 1db a3 5002 2db a3 5003 3db 0. 3db 0. 5db 0. 8db 1.5 db 2.0 db 2.5 db a3 5004 4db a3 5005 5db a5 5006 6db a5 5007 7db a5 5008 8db a5 5009 9db a5 5010 10db a8 5011 11db a8 5012 12db a8 5013 13db b5 5014 14db b5 5015 15db b5 5016 16db c0 5017 17db c0 5018 18db c0 5019 19db c5 5020 20db limitation ppe circuit packaging specifications reel 10 , 000 basic ordering unit (pcs) part no. attenuation, attenuation limitation circuit p pe 2 reel ( 180mm) : compatible with jeita standard "eiaj et-7200b" 180mm (7in.) paper tape (2mm pitch) z packaging 0 2 0 4 0 6 0 8 0 2 0 4 0 6 0 8 c abd abcd 180 0 ? 1.5 60 + 1 0 9 + 1.0 0 13 0.2 p 0 p 2 b 0 a 0 e f w t 2 d 0 p 1 label reel taping eiaj et-7200b compliant thick paper mount (underside paper tape) square punchout hole chip attenuator heat crimp cover / tape caution : insertion direction of device to carrier tape. marking is on the left bottom side of the cavity to the feeding direction. (unit : mm) (unit : mm) wf ea 0 b 0 d 0 p 0 p 1 p 2 t 2 8.0 0.3 3.5 0.05 1.75 0.1 1.17 0.1 1.17 0.1 1.5 + 0.1 0 4.0 0.1 2.0 0.1 2.0 0.05 max. 0.5 feeding direction
notes no technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of rohm co.,ltd. the contents described herein are subject to change without notice. the specifications for the product described in this document are for reference only. upon actual use, therefore, please request that specifications to be separately delivered. application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. rohm co.,ltd. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by rohm co., ltd. is granted to any such buyer. products listed in this document are no antiradiation design. appendix1-rev2.0 thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact your nearest sales office. rohm customer support system the americas / europe / asia / japan contact us : webmaster@ rohm.co. jp www.rohm.com copyright ? 2008 rohm co.,ltd. the products listed in this document are designed to be used with ordinary electronic equipment or de vices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. it is our top priority to supply products with the utmost quality and reliability. however, there is always a chance of failure due to unexpected factors. therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. rohm cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the notes specified in this catalog. 21 saiin mizosaki- cho, ukyo-ku, kyoto 615-8585, japan tel : +81-75-311-2121 fax : +81-75-315-0172 appendix
|
